Description

Powered monitor speaker, 4”, 20W, 2.1kg, 1 unit Main Features Simple operating environment with mic/line input jacks and controls integrated on the front panel The newly equipped combo jack input at the bottom of the front panel accepts a standard phone in addition to a microphone input on XLR. The line input terminal on the rear panel is also equipped with a TRS (3-pole) terminal, supporting balanced connections. The controls (power switch, volume, and tone control) and combo jack input are arranged for simple and easy operation. Maximum output sound pressure level (115dB SPL) far exceeding the size despite its compact size The “MS101-4” employs a bass-reflex type with a 4-inch full-range unit, and by placing the bass-reflex port at the rear, the height is reduced by approximately 1.8 cm to achieve a more compact housing. On the other hand, a new built-in power amplifier with a rated output of 30 W has also been incorporated to achieve a maximum output sound pressure level of 115 dB SPL, which is much higher than the size of the unit. In terms of sound quality, it inherits the clear reference sound of our powered monitor speakers, making it ideal not only for small private studios, but also for monitoring electronic musical instruments and as a communication monitor between the stage and the mixer console during live performances. 3. 3. lightweight and robust cabinet and inlet-type power cord for excellent portability Lightweight and robust materials are used for the cabinet, which, together with the compact size, has achieved a weight reduction of approximately 0.4 kg (from 2.5 kg to 2.1 kg). In addition, the power cable has been changed from the conventional built-in type to an AC inlet, which allows the power cable to be detached during relocation, and can be stored in a gap in the case or separately stored and transported, making it more convenient to carry. 4. support for installation on a microphone stand or wall by combining with optional accessories (sold separately) The M5 screw holes (2 locations, 60mm pitch) on the bottom of the main unit can be used in combination with optional brackets (sold separately) to hang the unit from the ceiling or install it on a wall. The BMS-10A microphone stand adapter (sold separately) can also be used to mount the unit on a standard microphone stand. Main Specifications Format: Full-range bass reflex powered speaker Playback frequency range (-10dB): 77Hz to 20kHz Maximum output sound pressure level: 115 dB SPL (peak@1m, measured value) Dimensions and weight: 142 (W) × 196 (H) × 187 (D) mm ・ 2.1 kg Speaker section: 4-inch cone Amplifier section: Rated Output: Dynamic: 30W Continuous: 20W Input Sensitivity/Impedance: Line1: -10dB/10kΩ, Line2: +4.0dB/10kΩ Controls: 1 x VOLUME, 1 x LOW CONTROL, 1 x HIGH CONTROL, POWER Connectors: Inputs: [Front] INPUT: Combo,. [Rear] INPUT LINE 1: Stereo Mini, INPUT LINE 2: Phone (TRS) Outputs: 1 x Phone (TRS) Power indicator: Green LED Power supply voltage: AC inlet 100V, 50/60Hz Power Consumption: Idling: 3W 1/8 output: 10W Translated with DeepL.com (free version)